Heat & Glo LifeStyle XLR-PB-AU Indoor Fireplace User Manual


  Open as PDF
of 70
 
19Heat & Glo • XLR-N-AU, XLR-PB-AU • 2198-906 Rev. M • 5/12
5
FramingandClearances
A. SelectingApplianceLocation
When selecting a location for the appliance it is important to
consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat-
ed out of trafc and away from furniture and draperies.
NOTICE: Illustrations reect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
10-1/4 in.
254 mm
A
E
A
B
C
TOP VENT
ONE 90º
ELBOW
ALCOVE
INSTALLATION
D*
TOP VENT
ONE 90° ELBOW
B
F
Figure5.1 ApplianceLocations
A B C D* E F
Inches 53 48 75
See Section D.
Figure 5.5 & 5.6
19-1/4 17-3/4
Millimeters 1350 1220 1910
See Section D.
Figure 5.5 & 5.6
490 450
 previous next