Filter
Top Products
Heat & Glo • ESC-42ST • 2146-900 Rev. o • 5/12 53
LOG NUMBER 2 (SRV2146-702): Place Log #2 as shown. The groove on the bottom of Log #2 engages with the
grate bar. Pull log forward so it engages the far right grate tine as shown in Figure 6. The “burnt” end of the log rests on
the burner. The log must NOT block any burner ports.
Figure 7 Reverse ViewFigure 6
1
1
2
2
2
2
1
1
GRATE
BAR
LOG NUMBER 3 (SRV2146-703): Place Log #3 so that groove on bottom of log engages the grate bar. Push log
back so that it rests against grate tine as shown in Figure 9. The “burnt” end of the log rests on the burner. The log must
NOT block any burner ports.
Figure 11 Reverse ViewFigure 10
Figure 9 Reverse ViewFigure 8
LOG NUMBER 4 (SRV2146-704): Place Log #4 so that the groove on bottom of log rests on the grate bar as show in
Figure 10. Push log so that it rests against the grate tine shown in Figure 11. The “burnt” end of the log rests on the burner.
The log must NOT block any burner ports.
3
3
1
1
2
2
3
3
2
2
1
1
3
3
2
2
1
1
4
4
4
4
1
1
2
2
3
3
GRATE
TINE
GRATE
TINE