Filter
Top Products
15
ASSEMBLY
LEFT REAR LOG
RIGHT REAR LOG
LEFT REAR LOG RECESS
RIGHT REAR LOG RECESSES
LEFT FRONT LOG RECESS
RIGHT FRONT LOG RECESS
PINS
LOGS AND EMBERS
Slide the logs and packing out of the firebox and set on the floor. Carefully unpack each of the four logs
and three loose ember pieces. The logs and embers are somewhat fragile and will not survive being
dropped from any significant height.
Remove the protective cover material from the top of the burner.
Each of the four logs is unique and must be placed in a precise location on top of the burner. The burner
and log system is designed to facilitate correct placement of the logs. Flat recessed areas on the burner top
are keyed to each of the four main logs. The rear logs also have locating pins with corresponding sockets in
the logs. The following illustration highlights these features.
Place the left rear log first. There is recessed area in the burner top as well as a locating pin in and a cor-
responding socket in the log. Line-up the socket over the pin and place the log in the recess.
Place the right rear log next. There is a recessed area on the top of the burner that corresponds to the shape
of the base of the log. Simply place the log in the recess. The following illustration shows the proper posi-
tions for the two rear logs.