Emergency Dial-Out
Emergency dial out consists of two distinct parts: the "digital dialer" and the "voice dialer."
Digital Dialer
The digital dialer (also called a "digital communicator") reports alarm events to a central station monitoring center. The digital
dialer sends a digitally coded message to the central station's receiver and computer. The computer in the central station presents
your name, address, and other information to a human operator who notifies the appropriate authorities.
Digital communications to a central station are generally superior to voice communications for three reasons:
- there is always someone manning the central station
- there is virtually no chance for misinterpretation
- personnel at the central station are trained to respond.
The digital communicator will not dial out until the Dial Out Delay has expired. If the alarm is canceled prior to the expiration of
the Dial Out Delay, no transmission will take place. If the alarm is canceled after the Dial Out Delay has expired, all alarm trips
will be transmitted followed by a Cancel code.
The communicator may be set up to automatically send a test code to the central station on a daily or weekly basis. This verifies
proper operation of the entire monitoring system on a periodic basis.
When the digital communicator is used, all voice dial outs will be delayed for five minutes after the expiration of the dial out
delay to allow time for the central station to call the premises.
If the HAI Two-Way Audio Module is being used, after the transmission of the alarm to the central station, the operator can talk
and listen to people and sounds at the premises.
If the digital communicator is unable to successfully communicate with the central station, the console will display a
Communicator Trouble condition.
Voice Dialer
In UL Listed Installations, the Voice Dialer is supplementary to the Digital Dialer described above.
The voice dial-out feature of the Omni IIe is a sophisticated system that can notify you at the office, on vacation, on a pocket
pager, or notify your neighbor, a relative, and in some cases, local authorities.
See What Happens When the Alarm is Activated, also Set Up Dial.
How the Omni IIe Voice Dialer Works
When a Burglar Alarm, fire alarm, police emergency keys, fire emergency keys, auxiliary emergency keys, gas alarm, water
alarm, Temperature alarm, or duress alarm is activated, the voice dialer looks at the Dial Order to determine which numbers to
dial and in what order. A Dial Order can have up to 8 entries, allowing the dialer to make up to 8 calls. If you want it to try a
number twice, it can be entered twice in the dial order.
The dial order numbers can be chosen from Dial Out Numbers 1 - 8.
Page 47