Filter
Top Products
To view your event log, from the top-level display or from the main menu, press the 7 key, then enter your code. The arrow keys
may be used to scroll through the event log, starting with the most recent event.
Each event log entry displays the time and date on the top line and a description of the event on the bottom line:
7:15 PM 5/8
USER NAME AWAY
For trouble conditions, the event log will show the zone name or specific trouble condition and "TROUBLE":
10:59 AM 5/8
BATTERY TROUBLE
For trouble restorations, the event log will show the zone name or specific trouble condition and "TRBL RST":
11:57 AM 5/8
BATTERY TRBL RST
The system records each remote access. A remote phone access is when someone calls into the system from an outside phone
line. Remote phone access is also recorded if the system phones out in response to an alarm and the called party enters a code.
The event log displays the code used to access the system and "REM ACCESS":
12:05 PM 5/8
USER NAME REM ACCESS
An event is logged after three unsuccessful attempts are made to log into the system from a remote phone, the Omni IIe will lock
out remote telephone access for 1 hour to discourage any further attempts to access the system - See Telephone Control.
Local access of the system using an in-house telephone is not recorded.
The event log will also record each time the PC Access software is used to access the system. The event log displays the code
used to access the system and "PC ACCESS".
Messages
The Message menu is used to show, log, clear, and send text messages, and to say and phone (dial out) your voice messages.
To enter the Message menu, from the top-level display or from the main menu, press the 8 (MESSAGE) key on the console.
MESSAGE
1=SHOW 2=LOG 3=CLEAR
↓
4=SAY 5=PHONE 6=SEND
↑
Show Message
The 1 (SHOW) key allows you to display the selected text message(s) on the console's top-level display. This can be a helpful
reminder of special events and occasions.
TRASH NIGHT
ENTER MESSAGE
↓
Page 39