Open as PDF
TURBO:Press this button to activate
/deactivatethe Turbo function which
enables the unit to reach the preset
temperature in the shortest time.
In cooling mode, the unit will blow
strong cooling air with super high
fan speed. In heating mode, the
unit will blow strong heating
air with super high fan speed.
Remote control description
SLEEP: Press this button to go into
the operation mode.
it again to cancel. This
only can be used in
maintain the most comfortable
temperature for you. To cancel SLEEP
program,press this button again.
(Only for models with
or DRY mode,
2.About switch between Fahrenheit
Under status of unit off, press "MODE"
and " -
" buttons simultaneously to switch
INTRODUCTION FOR SPECIAL
" and "-
" buttons simultaneously
to lock or unlock the keypad. If the
remote controller is locked, the icon
will be displayed on it, in that case,
press any button, the mark will
flicker for three times. Repress the
combination to unlock.
When in cool or dry mode,
press "BLOW" button to active
or deactive blow function ,the
icon will display and the indoor
fan will continuely run for 10
minutes in order to dry the indoor
unit even though you have turned
off the unit.
Turn the unit LED light on or off
TEMP:When pressing "TEMP" button,
there may be 3 optional icon display:
, , .But only is effective. The
display panel will indicate ambient
temperature for 5 seconds.