Filter
Top Products
LINE REPORTS SETUP Page 7-1
7
TS-TPI Installation and Wiring Guide
7 LINE Reports SETUP
Use this menu to program reports
to print or FAX automatically on a
schedule (faxing requires an
optional Fax/Modem device).
See Tank Sentinel Setup
Programming Guide Chapters 1,
10, 11 and 12 about Tank and
Line Test Reports & Scheduling.
See TABLE 7.1 – The SHIFT
selection allows 2 or 3 scheduled
reports to print or Fax per day
...
only one report will print if two
report-times are duplicated /
identical.
The asterisked (
*
) menus are
hardware or software dependent
and may or may not appear.
Push UP/DOWN ▲
▼ keys to show
more menus or menu selections.
To access menus, press the
corrsponding (M) key below each
menu name.
— Continued on next page —
Reports Menu
Press the DOWN ▼ key...
Press the DOWN ▼ key until the Line Comp, Line
Diag, Line Hist and Line Test menus are shown.
SELECT MENU OPTION
SETUP UPGRADE LANGUAGE DATALOG
M1 M2 M3 M4
SETUP MENU (MORE)
EXIT SYSTEM TANKS PROBES
SETUP MENU (MORE)
PRODUCTSMANIFOLDS*
REPORTS
LK TSTS
M1 M2 M3 M4
REPORT SCHEDULE (MORE)
LINE COMP* LINE DIAG LINE HIST* LINE TEST*
H U
MENU ½
Press this key in the highlighted
7
sequence shown below
TABLE 7.1 Typical Report Schedule
NONE
(no schedule)
SHIFT 1ST DAY
DAILY :
MONDAY 30TH DAY
: LAST DAY
SUNDAY (Feb. does not have 30 days)
TABLE 7.2 24 Hour Time Input Format
HH:MM:SS
00:00:00 = midnight
22:00:00 = 10 pm + 12 ( hours )
( add 12 hours to pm times starting at
1 pm to 11:59 pm
)
02:05:00 = 2:05 am