INSIDE FRONT COVER
TS-TPI Installation and Wiring
NOTICE
INCON/EBW has strived to produce the finest possible manual for you, and to
ensure that the information contained in it is complete and accurate. However,
INCON/EBW makes no expressed or implied warranty with regard to its contents.
INCON/EBW assumes no liability for errors or omissions, or for any damages,
direct or consequential, that result from the use of this document or the equipment
which it describes.
This document contains proprietary information and is protected by copyright. All
rights are reserved. No part of this document may be reproduced in any form
without the prior written consent of INCON/EBW.
INCON/EBW reserves the right to change this document at any time without notice.
Use the Table of Contents to find topics within this manual. Separate installation
instructions are provided for: the Needle Valve (PN 000-0045), the Calibration Kit
(PN 000-0043), and the LSU Transducer (PN 000-0058).
Need Help ? Mail Address (no packages):
INTELLIGENT CONTROLS INC
PO BOX 638
SACO ME 04072
Office Hours: 8 am to 5 pm EST, Monday through Friday
Sales – Orders 24 hour Technical Service
Delivery Schedules: RMA, Application Help:
Fax: (207) 283-0158 Fax: (207) 282-9002
Phone: (800) 872-3455 Phone: (800) 984-6266
email: sales@incon.com email: tech@incon.com
INCON/EBW is a wholly owned subsidiary of Franklin Electric and is member of the:
Franklin Fueling Systems Group. Visit our web site at:
Tank Sentinel
®
BriteSensors
®
and INCON
®
are registered trademarks of Intelligent Controls, Inc.
System Sentinel™ and System Sentinel ™ are trademarks of Intelligent Controls, Inc.
LS300 Auto-Learn
®
is a registered trademark of FE Petro
®
.
Copyright© 2003 – all rights reserved.
NOTE
www.franklinfueling.com