Filter
Top Products
TS-TPI DATA AND REPORTS Page 6-1
6
TS-TPI Installation and Wiring Guide
6 TS-TPI DATA AND REPORTS
Overview
The INCON Tank Sentinel displays, prints and faxes data and report information for
the user. This chapter describes the DISPLAY and DIAG (Diagnostic) menus, that
feature comprehensive user-interface data and report functions.
TPI Status Display Notes
The Display function allows a user to view current information from pump controllers
on a real time basis. The TPI periodically collects data from each pump controller.
The Tank Sentinel, in turn, periodically collects the data from the TPI and stores it
internally. The Tank Sentinel Display interface allows this data to be viewed at any
time.
To access the Display function, the user first presses the MENU key and then
DISPLAY key. Amongst the option keys displayed, the user must select the PUMPS,
which will cause a list of the attached pump controllers to be presented. Once the
user selects a pump, the console will proceed to display the real time data for that
pump controller.
See Appendix A at the back of this manual for Status Code definitions and Pump
Controller Fault Code definitions.
Tank Sentinel Keypad & Menu Navigation
Character input/editing:
Use UP or DOWN keys to display more menus- (MORE) or selections (UP/DN)
Press the CANCEL key to cancel data entry
Use the ENTER key to accept data entry
Press menu keys (M1 to M4) to access menus.
Press M4 to backspace (delete) one or more characters to the left
Use M2 to move the cursor right
Press M1 to move the cursor left