Filter
Top Products
2
Page 2-4 Installation and Wiring
TS-TPI Installation and Wiring Guide
LS300
TPI BOARD
BLACK
WHITE
RED
TXD 485-
GND
RXD 485+
TXD 485-
GND
RXD 485+
TXD 485-
GND
RXD 485+
TXD 485-
GND
RXD 485+
TXD 485-
GND
RXD 485+
HOST PORT
PORT 1
PORT 2
PORT 3
PORT 4
NO TS-TPI BOARD IN THIS LS300
IF TS-TPI IS PRESENT, REMOVE IT BEFORE
MAKING THE RS232 CONNECTION
LS300
EXTERNAL
RS232 PORT
TS1001 OR TS2001 ONLY
ATG
INPUTS
TS-LLD
485B
485A
S,RTN
DSY
IN 1
GND
IN 2
GND
RED
BLACK
WHITE
CABLE-BELDEN
3 CONDUCTOR
#9365-18AWG
OR EQUIVALENT
SEE TANK SENTINEL INSTALLATION GUIDE
(PART # 000-1050) AND LS300 USER'S GUIDE
(PART # 000-0040) FOR COMPLETE ATG AND
LS300 WIRING INFORMATION
PURCHASE
RS232 CABLE
LOCALLY
TS-TPI / two TS-LS300 with Automatic Tank Gauge
TS-1001, TS2001
Figure 2-3
● Provides communication between ATG and both TS-LS300 consoles. ATG
requires the Line Leak detection option for full operation of TS-LS300 and ATG
communication.
● Only one TS-LS300 has TS-TPI installed, if both have a TPI board remove the TPI
from one of the TS-LS300
● The RS232 cable is supplied by the customer
● TS-TPI configuration switch SW1 pole 3 is ON. See Figure 2-7 for more details and
switch settings on TS-TPI