Filter
Top Products
Reference Manual
300560EN, Rev AA
May 2011
5-11
Rosemount 2230
Section 5. Service and Troubleshooting
5.3.3 Status
Information
Status information is available for each measurement variable via the Status
button in the View menu.
Table 5-6. Status Information
Status button
Status Description Action
Invalid_TV_Value Invalid source value.
InvalidSourceConfig The source value (Tank Variable) is invalid
due to one of the following reasons:
• Incorrect configuration
• Out of service in FF
• Incorrect configuration of measurement
units
DataFrozen Tank measurement variable not updated for a
configurable time or the source data is frozen.
Saturated Low Tank measurement variables is outside lower
range or saturated.
Saturated High Tank measurement variables is outside upper
range or saturated.
Simulated The tank measurement variable is simulated.
Manual Value The tank measurement variable value is
manual (constant).
Approved Value The tank measurement variable value is inside
approval range and the device is write
protected.
Invalid Value The tank measurement variable value is
invalid.