Filter
Top Products
Reference Manual
300560EN, Rev AA
May 2011
3-5
Rosemount 2230
Section 3. Installation
Pipe Mounting
The 2230 can be mounted on pipes ranging from diameter 33 to 60 mm by
using an optional mounting kit supplied by Rosemount Tank Gauging.
1. Attach the bracket to the pipe.
2. Ensure that the 2230 is placed in a
direction so that the display is clearly
visible and wiring can be properly
connected.
3. Tighten the nuts. Use moderate torque
to ensure that the bracket does not
break.
4. Attach the mounting plate to the back of
the 2230 housing.
5. Attach the 2230 to the bracket by sliding
it from the top downwards.
6. Secure the 2230 to the bracket by
tightening the locking screw.
Bracket
4 nuts and
washers
Bracket
Mounting plate
Screw