Filter
Top Products
Reference Manual
300560EN, Rev AA
May 2011
4-9
Rosemount 2230
Section 4. Configuration and Operation
Table 4-1. Selectable variables
Select Variables in TankMaster WinSetup
Variables to present in the View Mode can also be configured by using the
TankMaster WinSetup configuration program. For more information see the
Raptor System Configuration Manual (Document no.300510EN).
Variable Description
Level Product level in the displayed tank.
Ullage Ullage is the distance from the Tank Reference
Point to the product surface.
Level Rate How the product in the tank moves when emptying
or filling the tank.
Signal Strength The signal strength of the radar level gauge.
Free Water Level The level of water in the bottom of the tank.
Available when a water level sensor is connected
to the tank.
Vapor Pressure Measured vapor pressure.
Liquid Pressure Measured liquid pressure.
Air Pressure Measured air pressure in the tank.
Ambient Temperature Air temperature outside the tank.
Vapor Temperature Temperature of vapor inside the tank.
Liquid Temperature Temperature of the product in the tank.
Tank Temperature Average temperature of the product in the tank
Temperature 1 To 16 Individual temperature of each selected
temperature spot element.
Observed Density Actual density of the product in the tank.
Reference Density Reference density as specified with the
configuration tool.
Flow rate Measured flow rate.
Tot Obs Volume Total observed product volume in the tank.
User defined 1 t o5 Custom measurement variable.
Middle Pressure Measured pressure from transmitter P2.
Tank Height Tank Reference Height
Level Difference between two product levels.