Filter
Top Products
Instruction Manual
760007-A
July 2003
Rosemount Analytical Inc. A Division of Emerson Process Management Appendix A. Menu Displays 7-37
Model NGA2000 PMD
Software Diagnostics
Shows the first detected software error since the
variable on the bottom line was reset.
Please report any errors to your service
representative. They may mean nothing.
The analyzer has a lot of error recovery code.
Errors may therefore correct themselves.
HOME
ESCAPE INFO
Re-initialize the analyzer
Are you sure?
INIT will erase ALL the configuration data, including
manufacturing data, serial numbers etc.
If you are sure, press INIT again.
HOME
ESCAPE INFO
INIT
Calibration Parameters
Disable the limits to recover from calibration failure
Calibration averaging time sets the time used by the
analyzer to average its reading. Longer times will give
a better calibration.
Calibration failure alarm will issue a WARNING if the
analyzer has to change calibration by more than the
Cal failure error, if warning alarms are enabled.
Calibration time out sets how long the analyzer will wait
for the signal to stabilize before issuing a WARNING.
You can zero or span the ranges all at once or not.
HOME
ESCAPE INFO
Menu: 108 ACALSETI1A
Menu: 109 INIT
Menu: 110 SWDIAGI1