Filter
Top Products
Instruction Manual
760007-A
July 2003
7-14 Appendix A. Menu Displays Rosemount Analytical Inc. A Division of Emerson Process Management
Model NGA2000 PMD
Primary variable parameters
Shows the parameters used to calculate the primary
reading.
The bicell readings are the individual outputs of the two
photocells. The instrument responds to the difference
between them, but each signal should be as large as
possible without saturating.
The pk-pk noise is a measure of the standard deviation
of the signal.
HOME
ESCAPE INFO
Temperature control
These are the variables used to define
the operation of the PID algorithms
used for temperature control.
Adjust them at your own risk!
This analyzer controls its detector temperature, while
keeping its case temperature within rather wide limits.
HOME
ESCAPE INFO
Physical Measurements
Sample flow:
Sample pressure:
Case temperature:
Detector temperature:
Flow limits…
Pressure limits…
000.0
000.0
000.0
000.0
HOME
ESCAPE INFO
Menu: 39 AM1Vl1
Menu: 40 AMTEMPl1
Menu: 41 AM2VA