Filter
Top Products
www.desatech.com
111245-01C22
3. If not already completed, install gas piping to
replace location. This installation includes an
approved exible gas line (if allowed by local
codes) after the equipment shutoff valve. The
exible gas line must be the last item installed
on the gas piping. See Installing Gas Piping
to Fireplace Location, page 17.
4. Carefully set replace in front of rough opening
with back of replace inside wall opening.
5. Attach exible gas line to gas supply. See Con-
necting Fireplace to Gas Supply, page 18.
6. Plug electrical cord(s) into electrical outlet
installed in step 2.
7. Carefully insert replace into rough opening.
8. Attach replace to wall studs using nails or
wood screws through holes in nailing ange
(see Figure 36).
9. Check all gas connections for leaks. See
Checking Gas Connections, page 19.
10. Install brass trim. See Assembling and Attach-
ing Optional Brass Trim, page 23
INSTALLATION
Continued
35
1
/
2
"
17
3
/
4
"
33"
39
3
/
8
"
27
7
/
8
"
55
5
/
8
"
35
1
/
2
"
Figure 34 - Rough Opening for Installing
in Wall
Figure 35 - Rough Opening for Installing
in Corner
Figure 36 - Attaching Fireplace to Wall
Studs
Nailing
Flanges
Nails or
Wood
Screws
Installation
If placing mantel above built-in replace, you must
meet minimum clearance between mantel shelf and
top of replace opening.
minimum clearances shown in
NOTICE: If your installation does
not meet the minimum clear-
ances shown, you must do one
• raise the mantel shelf to an
• remove the mantel shelf