Filter
Top Products
Version 1.0b
14
STEP 3:
The front burner assembly is now ready for installation. This assembly includes the front burner tray and
adjustable shutter gas tube. This front burner sits into the only opening left from the part installed in STEP
2. It is important to ensure the adjustable shutter tube sit properly over the front gas orifice so that the front
burner tray will sit flat into its opening. FIGURE 10 shows the front burner tray sitting in the Inglenook
Fireplace. The front burner plate is blue in color and the rear burner plate is red in color in FIGURE 10.
FIGURE 10: STEP 3 COMPLETE
FIGURE 11 shows a close-up view of the adjustable shutter burner tubes and the front and rear gas orifices
located along side the gas control valve. These gas tubes can be seen by looking into the ash box
compartment where the gas valve assembly is located.
FIGURE 11: BURNER TUBE AND FRONT/REAR ORIFICES