C-38
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 7.2
OL-29168-01
Appendix C Troubleshooting
Troubleshooting the Appliance
Realm Keys key1.0
Signature Definition:
Signature Update S697.0 2013-02-15
OS Version: 2.6.29.1
Platform: IPS4360
Serial Number: FCH1504V0CF
No license present
Sensor up-time is 3 days.
Using 14470M out of 15943M bytes of available memory (90% usage)
system is using 32.4M out of 160.0M bytes of available disk space (20% usage)
application-data is using 87.1M out of 376.1M bytes of available disk space (24%
usage)
boot is using 61.2M out of 70.1M bytes of available disk space (92% usage)
application-log is using 494.0M out of 513.0M bytes of available disk space (96%
usage)
MainApp V-2013_04_10_11_00_7_2_0_14 (Release) 2013-04-10T11:05:55-0500
Running
AnalysisEngine V-2013_04_10_11_00_7_2_0_14 (Release) 2013-04-10T11:05:55-0500
Running
CollaborationApp V-2013_04_10_11_00_7_2_0_14 (Release) 2013-04-10T11:05:55-0500
Running
CLI V-2013_04_10_11_00_7_2_0_14 (Release) 2013-04-10T11:05:55-0500
Upgrade History:
IPS-K9-7.2-1-E4 11:17:07 UTC Thu Jan 10 2013
Recovery Partition Version 1.1 - 7.2(1)E4
Host Certificate Valid from: 17-Apr-2013 to 18-Apr-2015
sensor#
Note
If you do not have the latest software updates, download them from Cisco.com. Read the
Readme that accompanies the software upgrade for any known DDTS for the ARC.
Step 5
Make sure the configuration settings for each device are correct (the username, password, and IP
address).
Step 6
Make sure the interface and directions for each network device are correct.
Step 7
If the network device is using SSH-3DES, make sure that you have enabled SSH connections to the
device.
Step 8
Verify that each interface and direction on each controlled device is correct.
For More Information
•
For the procedure for obtaining the latest Cisco IPS software, see Obtaining Cisco IPS Software,
page 20-1.
•
For more information about configuring devices, see Device Access Issues, page C-39.
•
For the procedure for verifying the interfaces and directions for each network device, see Verifying
the Interfaces and Directions on the Network Device, page C-40.
•
For the procedure for enabling SSH, see Enabling SSH Connections to the Network Device,
page C-41.