Filter
Top Products
3-41
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 7.2
OL-29168-01
Chapter 3 Setting Up the Sensor
Configuring Time
c.
Verify your settings.
sensor(config-hos-non-sta)# show settings
start-summertime
-----------------------------------------------
date: 2004-05-15
time: 12:00:00
-----------------------------------------------
sensor(config-hos-non-sta)#
Step 5
Enter end summertime submode.
sensor(config-hos-non-sta)# exit
sensor(config-hos-non)# end-summertime
Step 6
Configure the end summertime parameters:
a.
Enter the date you want to end summertime settings. The format is yyyy-mm-dd.
sensor(config-hos-non-end)# date 2004-10-31
b.
Enter the time you want to end summertime settings. The format is hh:mm:ss.
sensor(config-hos-non-end)# time 12:00:00
c.
Verify your settings.
sensor(config-hos-non-end)# show settings
end-summertime
-----------------------------------------------
date: 2004-10-31
time: 12:00:00
-----------------------------------------------
sensor(config-hos-non-end)#
Step 7
Specify the local time zone used during summertime.
sensor(config-hos-non-end)# exit
sensor(config-hos-non)# summertime-zone-name CDT
Step 8
Specify the offset.
sensor(config-hos-non)# offset 60
Step 9
Verify your settings.
sensor(config-hos-non)# show settings
non-recurring
-----------------------------------------------
offset: 60 minutes default: 60
summertime-zone-name: CDT
start-summertime
-----------------------------------------------
date: 2004-05-15
time: 12:00:00
-----------------------------------------------
end-summertime
-----------------------------------------------
date: 2004-10-31
time: 12:00:00
-----------------------------------------------
-----------------------------------------------
sensor(config-hos-non)#
Step 10
Exit non-recurring summertime submode.
sensor(config-hos-non)# exit