Filter
Top Products
17-46
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 7.2
OL-29168-01
Chapter 17 Administrative Tasks for the Sensor
Displaying Hardware Inventory
Displaying Hardware Inventory
Use the show inventory command to display PEP information. This command displays the UDI
information that consists of the PID, the VID, and the SN of your sensor. If your sensor supports
SFP/SFP+ modules and Regex accelerator cards, they are also displayed. PEP information provides an
easy way to obtain the hardware version and serial number through the CLI.
Note
The show inventory command now displays the FRUable components of the 4300 series sensors.
To display PEP information, follow these steps:
Step 1
Log in to the CLI.
Step 2
Display the PEP information. You can use this information when dealing with TAC.
sensor# show inventory
Name: "Chassis", DESCR: "IPS 4360 with SW, 8 GE data + 1 GE mgmt"
PID: IPS-4360 , VID: V00, SN: FCH1504V04T
Name: "RegexAccelerator/0", DESCR: "LCPX8640 (humphrey)"
PID: PREAKNESS 2G , VID: 335, SN: LXXXXXYYYY
sensor#
sensor# show inventory
Name: "Chassis", DESCR: "IPS 4255 Intrusion Prevention Sensor"
PID: IPS-4255-K9, VID: V01 , SN: JAB0815R017
Name: "Power Supply", DESCR: ""
PID: ASA-180W-PWR-AC, VID: V01 , SN: 123456789AB
sensor#
sensor# show inventory
Name: "Module", DESCR: "ASA 5500 Series Security Services Module-20"
PID: ASA-SSM-20, VID: V01 , SN: JAB0815R036
sensor#
sensor# show inventory
Name: "Chassis", DESCR: "IPS 4240 Appliance Sensor"
PID: IPS-4240-K9, VID: V01 , SN: P3000000653
sensor#
sensor# show inventory
Name: "Chassis", DESCR: "IPS 4345 Intrusion Protection System"
PID: IPS4345 , VID: V00, SN: FCH1445V00N
Name: "RegexAccelerator/0", DESCR: "LCPX8640 (humphrey)"
PID: FCH1442705J , VID: 335, SN: LXXXXXYYYY
sensor#
sensor# show inventory
Name: "Module", DESCR: "IPS 4520- 6 Gig E, 4 10 Gig E SFP+"
PID: IPS-4520-INC-K9 , VID: V01, SN: JAF1547BJTJ