1-11
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 7.2
OL-29168-01
Chapter 1 Introducing the CLI Configuration Guide
CLI Keywords
CLI Keywords
In general, use the no form of a command to disable a feature or function. Use the command without the
keyword no to enable a disabled feature or function. For example, the command ssh host-key ip_address
adds an entry to the known hosts table, the command no ssh host-key ip_address removes the entry from
the known hosts table. Refer to the individual commands for a complete description of what the no form
of that command does.
Service configuration commands can also have a default form. Use the default form of the command to
return the command setting to its default. This keyword applies to the service submenu commands used
for application configuration. Entering
default
with the command resets the parameter to the default
value. You can only use the default keyword with commands that specify a default value in the
configuration files.