-xxiii
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 7.2
OL-29168-01
Preface
Published: April 29, 2013, OL-29168-01
Contents
This document describes how to configure the sensor using the Cisco IPS 7.2 CLI. It contains the
following sections:
•
Audience, page xxiii
•
Organization, page xxiii
•
Related Documentation, page xxv
•
Obtaining Documentation and Submitting a Service Request, page xxvi
Audience
This guide is intended for administrators who need to do the following:
•
Configure the sensor for intrusion prevention using the CLI.
•
Secure their network with IPS sensors.
•
Prevent intrusion on their networks and monitor subsequent alerts.
Organization
This guide includes the following sections:
Section Title Description
1 “Introducing the CLI Configuration
Guide”
Describes the purpose of the CLI Configuration
Guide.
2 “Logging In to the Sensor” Describes how to log in to the various sensors.
3 “Initializing the Sensor” Describes how to use the setup command to
initialize sensors.
4 “Setting Up the Sensor” Describes how to use the CLI to configure initial
settings on the sensor.