Filter
Top Products
17-50
Cisco Intrusion Prevention System Sensor CLI Configuration Guide for IPS 7.2
OL-29168-01
Chapter 17 Administrative Tasks for the Sensor
Displaying Submode Settings
password: <hidden>
username: <defaulted>
-----------------------------------------------
profile-name: fwsm
-----------------------------------------------
enable-password: <hidden>
password: <hidden>
username: pix default:
-----------------------------------------------
profile-name: outsidePix
-----------------------------------------------
enable-password: <hidden>
password: <hidden>
username: pix default:
-----------------------------------------------
profile-name: cat
-----------------------------------------------
enable-password: <hidden>
password: <hidden>
username: <defaulted>
-----------------------------------------------
profile-name: rcat
-----------------------------------------------
enable-password: <hidden>
password: <hidden>
username: cisco default:
-----------------------------------------------
profile-name: nopass
-----------------------------------------------
enable-password: <hidden>
password: <hidden>
username: <defaulted>
-----------------------------------------------
profile-name: test
-----------------------------------------------
enable-password: <hidden>
password: <hidden>
username: pix default:
-----------------------------------------------
profile-name: sshswitch
-----------------------------------------------
enable-password: <hidden>
password: <hidden>
username: cisco default:
-----------------------------------------------
-----------------------------------------------
cat6k-devices (min: 0, max: 250, current: 1)
-----------------------------------------------
ip-address: 192.0.2.12
-----------------------------------------------
communication: telnet default: ssh-3des
nat-address: 0.0.0.0 <defaulted>
profile-name: cat
block-vlans (min: 0, max: 100, current: 1)
-----------------------------------------------
vlan: 1
-----------------------------------------------
pre-vacl-name: <defaulted>
post-vacl-name: <defaulted>
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
router-devices (min: 0, max: 250, current: 1)