Filter
Top Products
SKU 65712 For technical questions, please call 1-800-444-3353. Page 24
Setting Automatic Closing Time:
Figure PP Figure QQ
18. Press and hold the “SET” Button for more than four seconds. Press the “UP”
Button and choose gure “5”. Press and release the “SET” Button. The Digital
Display will indicate a ashing “5”. Now the unit enters into the setting the auto-
matic closing time mode. (See Figures PP and QQ.)
(0-9)
Figure RR
(9-0)
Figure SS
19. Press and release the “UP” Button. The Digital Display will show a ashing
“1” - “9” (default value is “0”, automatic closing function is disabled) which in-
dicates the current automatic closing time. The minimum time is one minute, 9
minutes maximum. Each time you press and release the “UP” Button, the gure
increases by 1, and the timing increases by one minute. Each time you press and
release the “DOWN” Button, the gure decreases by 1, and the timing decreases
by one minute. When the timing is 0, it means the automatic closing function is
closed. (See Figures RR and SS.)
Figure TT Figure UU
20. Press the “SET” Button to store the data when the desired automatic closing time
is set. The Digital Display will indicate a steadily glowing “5”. The unit is ready for
setting another parameter. If no other setting is to be programmed right now, press