Filter
Top Products
SKU 65712 For technical questions, please call 1-800-444-3353. Page 14
Refer to the vertical and horizontal lines drawn in 12. Figure I for proper placement of
the Header Bracket (54).
FIGURE J
HEADER
BRACKET
(54)
MOUNTING
HOLES
HEX TAPPING SCREW (55)
CONCRETE ANCHOR (56)
HEX
TAPPING
SCREW
(55)
VERTICAL CENTER LINE
HEADER BRACKET (54)
2”
HORIZONTAL
LINE
VERTICAL
CENTER LINE
6”
a. Wall Mount: Center the Header Bracket (54) on the vertical center line with the
bottom edge of the Header Bracket on the horizontal line (with the arrow pointing
toward the ceiling). Mark the two Header Bracket mounting holes. Drill two 3/16”
pilot holes and fasten the Header Bracket with two Hex Tapping Screws (55).
(See Figures I and J.)
Ceiling Mount: b. Extend the vertical center line onto the ceiling. Center the Head-
er Bracket (54) on the vertical mark no more than 6” from the wall (with the arrow
pointing toward the unit’s Housing (31). Mark the two Header Bracket mounting
holes. Drill two 3/16” pilot holes and fasten the Header Bracket with two Hex Tap-
ping Screws (55). For a concrete ceiling mount, use the two Concrete Anchors
(56) provided. (See Figures I and J.)