Filter
Top Products
SKU 65712 For technical questions, please call 1-800-444-3353. Page 11
FIGURE D
CHAIN
(59)
IDLER PULLEY
(68)
TROLLEY
(45)
4. The Chain (59), Trolley (45), and Idler Pulley (68) have been pre-assembled in the
Rail (35). Make sure these parts are complete and in good condition.
(See Figure D.)
FIGURE E
RAIL
(35)
RAIL BRACE
(44)
5. Lubricate the inside edges of the Rails (35) using grease. Place the Rails on a at
surface for assembly. All four Rails are interchangeable. Slide a Rail Brace (44)
onto a Rail. Connect a Rail by sliding a Rail Brace onto the next Rail. Tap the Rail
assembly on a piece of at scrap wood until all Rails are ush. Repeat this proce-
dure with the remaining Rails. (See Figure E.)