Filter
Top Products
LOCAL CODES
The installation must conform with local
codes or, in the absence of local codes,
with the National Fuel Gas Code, ANSI
Z223.1/NFPA 54, or the Natural Gas and
Propane Installation Code, CSA B149.1.
NOTE:For a direct vent gas fireplace
heater for an OME manufactured home
(USA only) or mobile home installation,
“This appliance must be installed in
accordance with the Standard CAN/CSA
Z240 MH, Mobile Housing, in Canada, or
with the Manufactured Home Construction
and safety standard, Title 24 CFR, Part
3280, in the United States, or when such a
standard is not applicable, ANSI/NCSBCS
A225.1/NFPA, Manufactured Home
Installation Standard.
A direct vent gas appliance for manufactured
Home (USA only) or mobile home OEM
Installation or recreational vehicle
installation shall be marked with a Class
IIIC marking either ”for OEM installation
in a manufactured home (USA only) or
mobile home only, “for installation in a
recreational vehicle only, “ or “for OEM
installation in a manufactured home (USA
only) or mobile home or recreational
vehicle only”.
PRODUCT FEATURES
OPERATION
This cast iron stove with burner system is
clean burning and vents easily through
outside walls or vertically using outside air
for combustion. Heat is generated by
realistic flames. When used without the
blower accessory, the stove with burner
system requires no electricity making it
ideal for emergency backup heat.
PIEZO IGNITOR
This burner system has a piezo ignitor. This
system requires no matches, batteries, or
other sources to light burner system.
GLOSSARY OF TERMS
Chase - A boxlike enclosure to protect
venting from the elements when the
venting run is on the outside of a structure.
Mastic - A pliable sealant for use around
the vent terminal.
Snorkel Termination - A box that raises
the horizontal termination above ground
level clearances.
Vent Terminal - Mounted on an outside
wall or roof to separate the inlet and outlet
of the vent system and protect it from
weather.
Vinyl Siding Standoff - A metal box that
separates the vent cap from vinyl siding.
Wall Thimble/Firestop - A metal plate
used to secure the vent pipe when it passes
through a wall or ceiling.
STOVE
BODY
STOVE DOOR
(SHOWN IN THE OPEN
POSITION)
OPTIONAL
REMOTE CONTROL
BRACKET
PIEZO IGNITOR
AUTO
OFF
MANUAL
PRESSURE ADJUSTMENT
(FLAME) KNOB
FIGURE 1– TYPICAL STOVE CABINET MODEL
VALVE CONTROL KNOB
LOG SET
ON/OFF SWITCH
LOCATED ON OP-
POSITE SIDE OF
UNIT FOR BLOWER
CONTROL
REAR COVER
AND AIR
CHANNEL
BLOWER MOTOR
COVER
VENT OPENING
PILOT ASSEMBLY
FRONT BURNER
REAR BURNER
GAS VALVE
GAS SUPPLY LINE
GLASS COVER DOOR
PRODUCT IDENTIFICATION
LEFT SIDE
RIGHT SIDE
FRONT
2