Filter
Top Products
APPENDIX —————————————————————————————————————————————————————————
—
186
6
Align the holes on the embroidery frame holder
with the pins in the frame-mounting plate of the
carriage.
1 Pins in the frame-mounting plate
2 Holes on the embroidery frame holder
7
Secure the embroidery frame holder with the two
thumb screws.
1 Use the thumb screws included with the machine
(thumb screws removed in step
1 on page 171).
Additional digitizing
information
When creating a pattern for embroidering with a cap
frame, pay attention to following points in order to
avoid registration problems (misalignment of gaps in
the pattern).
1
Sew underlay stitches.
2
Start the embroidery pattern from the center,
and sew toward the ends.
With PR-600II, the order in which patterns are
selected when they are combined is the order
in which they will be sewn. For the following
example, select the patterns in the order
“E”
→”A”→”B”→”R” to make the combined
pattern “BEAR”.
Note
● Do NOT sew from one end to the other,
otherwise wrinkling or shrinking may occur.
● Using the disc-shaped screwdriver
included, firmly tighten the thumb
screws.
CAUTION
Incorrect
sewing
order
Correct
sewing
order
Sapphire_chapt7.fm Page 186 Friday, November 18, 2005 12:10 PM