Filter
Top Products
APPENDIX —————————————————————————————————————————————————————————
—
170
Types of caps
With PR-600II, we recommend that the following
types of caps be embroidered.
■ Standard(Pro Style)
■ Low Profile (Low fitting)
■ Golf Style
Memo
● Check if this area 1 is covered with mesh.
Note
● There is no centerline that can be used as a
guide for placing the cap in the cap frame.
Before framing the cap, use a charcoal pen
to mark the centerline.
Otto Interna-
tional, Inc. cap
model number
(Example)
OTTO27-007
Mesh backing on
the back of front
panels
(soft or hard)
Constructed
firm front
Unconstructed
soft crown
Ease of framing
(hooping)
Easy
(Recommended)
Fairly easy
Backing 1 to 2 ply 2 to 3 ply
Otto Interna-
tional, Inc. cap
model number
(Example)
OTTO23-225 OTTO18-203
Mesh backing on
the back of front
panels
(soft or hard)
Constructed
firm front
Unconstructed
soft crown
Ease of framing
(hooping)
Very difficult
(because the
cap material
very hard.)
Fairly easy
Backing 1 to 2 ply 2 to 3 ply
Face: Pro style
6 sections
Face: Low fitting
6 sections
Otto Interna-
tional, Inc. cap
model number
(Example)
OTTO23-225
Mesh backing on
the back of front
panels
(soft or hard)
Constructed
firm front
Ease of framing
(hooping)
Fairly easy
Backing 1 to 2 ply
Face: Not divided
5 sections
Sapphire_chapt7.fm Page 170 Friday, November 18, 2005 12:10 PM