Filter
Top Products
MIC612 Thermal Camera | en 69
Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09
A.1.2 Commands, Thermal Camera
On 99 Factory P/T Home Position Recalibrates home position; can be used as an
Alarm Output.
On/Off 100 Record A Activates/deactivates recording A.
On/Off 101 Record B Activates/deactivates recording B.
On/Off 102 Wiper continuous Turns on/off continous wiper mode.
On/Off 103 Wiper intermittent Activates the wiper in Intermittent mode (the
wiper wipes twice, then turns off after 15
seconds).
On/Off 104 Wiper one shot Activates (One shot) to wipe five times, then turn
off.
On/Off 105 Wash/Wipe Activates wash/wip mode. Cameras moves to
designated washer preset (62), wiper starts
automatically.
On 997 FastAddress, display Display the current FastAddress of the camera.
On 998 FastAddress, all units Displays the current FastAddress of the camera
and programs all units.
On 999 FastAddress, unaddressed cameras Displays and programs unaddressed MIC612
units.
Set “1-99” Pre-position Programming Set ##–Programs a preset view.
Shot “1-99” Pre-position Recall Shot ##–Recall programmed preset.
Set 100 Pre-position Menu Enters the Pre-position menu.
Set/Shot 101 Autopan Left Limit Set–Programs left limit.
Shot–Shows limit.
Set/Shot 102 Autopan Right Limit Set–Programs right limit.
Shot–Shows limit.
Set 110 Factory P/T Home Position Set–Recalibrate home position.
* Set 802 Edit Password Enters the Edit Password menu.
* Set 899 Reset ALL Restores all settings to original defaults and
clears all user-programmed settings.
Set 900 Edit Tour 1 (Standard) Enters the Standard Tour Scene menu.
Shot 900 Edit Tour 2 (Custom) Enters the Custom Tour Scene menu.
Set/Shot 901-999 Adds/Removes a Preposition Shot
from Tour 1
Set ###–Adds preset.
Shot ###–Removes preset.
Locked Function
Key
Command
No.
Command Description
Locked Function
Key
Command
No.
Command Description
On/Off 1 Scan 360° Autopan without limits.
On/Off 2 Autopan Autopan between limits.
On/Off 7 Play Custom Pre-position Tour Activates/Deactivates the playback of a custom,
pre-position tour.
On/Off 8 Play Pre-position Tour Activates/Deactivates the playback of a pre-
position tour.
* On/Off 18 AutoPivot Enable Enables/disables AutoPivot.
On/Off 50 Playback A, continuous Activates/Deactivates continuous playback A.
On/Off 51 Playback A, single Activates/Deactivates single playback A.
On/Off 52 Playback B, continuous Activates/Deactivates continuous playback B.
On/Off 53 Playback B, single Activates/Deactivates single playback B.
* On/Off 69 Alarm Rule Activation/Deactivation On–Enables all alarm rules.
Off–Disables all alarm rules.
* On/Off 80 Digital Zoom Lock Turns digital zoom on and off.