Filter
Top Products
16 en | Installation Overview MIC612 Thermal Camera
F.01U.249.416 | 2.0 | 2012.09 Installation Manual Bosch Security Systems, Inc.
3.3 About the MIC Shielded Composite Cable
MIC shielded composite cables are multi-conductor cables of various lengths (and gauges
ranging from 14 - 18) that provide all power, video, and telemetry connections between the
MIC PSU and the MIC camera. The cables are pre-made with a female-terminated 14-pin
connector at one end for attachment to the male connector installed into the base of the
camera. The other end of the cables has free (non-terminated) wires for wiring into terminals
in the MIC PSU.
Figure 3.6 Composite cable before connection to MIC612 camera
Figure 3.7 Composite cable connected to MIC612 camera
3.4 About Alarm Inputs and Outputs
The table below identifies the number of alarm inputs and outputs available with and without
an 8-input alarm card installed in the MIC PSU.
NOTICE!
Bosch does not recommend using the composite cable for distances greater than 25 m
between the MIC camera and the power supply.
To prevent water penetrating the composite cable connector threads, seal the 25 mm thread
at final installation using PTFE tape. Alternately, a suitable sealant may be liberally applied to
the thread prior to final tightening.
Alarm Card
Installed?
Number of
Alarm Inputs
Number of
Alarm Outputs
Yes 8 2
No 1 0