Filter
Top Products
MIC612 Thermal Camera On-Screen Display (OSD) Menus (Pelco Protocol) | en 55
Bosch Security Systems, Inc. Installation Manual F.01U.249.416 | 2.0 | 2012.09
Camera Setup Menu Choices:
7.3 PTZ Setup
The Pelco PTZ Setup Menu provides access to the PTZ settings such as tours, scan speed,
presets, limit stops, recording, and AutoPivot.
Menu Description Sub-menu / Description Default Setting
Exit Exits the menu.?
White
Balance
Sets a default value in
case the Pelco
controller disables the
white balance.
OUTDOOR: Sets a default setting if
the controller disables white balance.
INDOOR: Sets a default setting if the
controller disables white balance.
OUTDOOR
Night Mode Switches from color to
monochrome.
ON: Sets Night Mode on.
OFF: Sets Night Mode off.
AUTO: Sets Night Mode to Auto set.
ON (Day/Night
models only)
Wiper ON/OFF: Activates/deactivates the
selected wiper mode, respectively.
CONTINUOUS: Wiper wipes
continously until deactivated
manually or by the five-minute time-
out built in to the system.
INTERMITTENT: Wipes twice, then
turns off after 15 seconds.
ONE SHOT: Wipes five times, then
turns off.
WASH WIPE: Wiper washes and
wipes.
Continuous
PTZ Setup
Exit...
* Edit Tour 1...
* Edit Tour 2...
* Tour 1 Period: 5 sec
* Tour 2 Period: 5 sec
* Scan Speed 30 deg/sec
Edit Presets...
* Limit Stops: OFF
* Recording: “A”
*Autopivot: ON
* = Factory Setting
Focus / Iris: Select