Filter
Top Products
Prepared by Monique Lania 5 Call Servicing Guide ProHeat 2X 9400F.doc
Solution 4:
How?
Using a Phillips Head Screw Driver, unscrew the screw just above the front nozzle and remove it.
Turn the machine on its side so that the belt access area is facing upwards.
Making sure the cord side of the machine is facing down
Remove the clear end cap by unscrewing the 2 black screws on the end cap, taking care not to
drop the screws into the unit. Also remove the 1 Silver screw in the middle of the end cap.
Remove the black Pivot Arm by gently lifting it up-and-across towards you
Switch machine OFF (O). Unplug machine from the outlet at the wall. Remove the
Tank-Tank Assembly & SmartMix Solution Bottle from the machine
Check Small Brush Belt to ensure it is in place