Filter
Top Products
Prepared by Monique Lania 21 Call Servicing Guide ProHeat 2X 9400F.doc
Consumer states the unit has no power.
Solution 1
How?
Slide upper handle firmly onto lower handle until screw holes are completely aligned
Align upper handle screw holes and top half of tool caddy holes
Yes, problem solved
In order for the unit to operate the upper handle must be fully inserted into unit as the power switches
for the unit are located in the upper handle. Ensure the handle is pushed all the way into the unit
No, refer customer to an Authorized Service Centre
Place screws into back of machine in the holes marked with an arrow and tighten
screws with a Philli
p
s head screw drive
r
until snu
g
. Does the unit have
p
ower now?