Filter
Top Products
9
6. Setting the time clock (continued)
P
r
o
g
.
h
m
Day
M
anual switch
S
ummer and
w
inter time
setting
Reset
E
nter
w
eekday/s
E
nter
the hours
W
eek-
d
ays
flash
E
nter
minutes
E
nter
switching
t
imes
I
mput
time
Automatic Manual Continuous
Operation Operation Operation
The switching If the current You can only
times corres- switching mode is return to automatic
pond to the changed manually, mode from the
program the next switching continuously-ON
entered. time will be and continuously-
carried out auto- OFF switching
matically again modes by
according to the pressing the " "
entered switching key.
program.
= ON = ON = Continuously ON
= OFF = OFF = Continuously OFF
Operating the time switch
The steps marked with the symbol “
” are necessary to carry out a switching program.
Preparing for Operation
Activate the “Res” switch (=RESET) to reset the time switch to its default setting (activate using a pencil or similar pointed
instrument). Do this:
- every time you wish to “reset” the time switch
- to erase all switching times and the current time of day.
After approximately two seconds the following display appears:
Enter current time and weekday
- Keep the “ ” button pressed down
During the summer time period press the +/- 1h button once.
Enter the hour using the “h” button
Enter the minutes using the “m” button
Enter the day using the “Day” button
1 = “Monday”..............7 = Sunday
- Release the “ ” button.
6.2 Setting the Digital Clock