Filter
Top Products
36
1
15. Fitting the casing
M
N
R
A
Fig. 44
Fitting the casing
Remove the protective film on the casing:
- Locate the lower clips into the slots in the chassis
- Engage hooks
N on the casing in notches R on the side panels M operation (Fig. 43)
- Fit the top of the panel in place
-
Close the panel mounting clamps (Fig. 44)
-
Screw in the two clamp locking bolts
A
N
ote: it is essential to refit both locking bolts A
Fig. 43