Filter
Top Products
B-2 P/N 560-0119-00
Troubleshooting Apollo 360 Map Display
Problem Possible Cause(s) Action
No position
fix
Host navigation
device hasn’t
acquired fix yet
No active route
in host navigation
device
Ensure that host device
is working properly &
in view of navigation
signal input
Some host devices
won’t supply nav.
information unless an
active route is present.
Configure & activate a
route in host device
Search for
nearest
waypoints
reveals too
few or
wrong types
of waypoints
Incorrect
selection of
waypoint types to
show after search
Check “Declutter Maps”
option as Section 5
describes to verify that
desired waypoint types
to search are “On”
Wrong types
of waypoints
show on
moving map
screens
Incorrect
selection of
waypoint types to
show on moving
map screens
See action above - the
waypoint types you set to
“No” do not show on
moving map screens OR
after nearest waypoint
searches
Airspace
boundaries
missing
from
moving map
screens
Airspace display
on moving map
screens set to
“Off”
Check “Map Setup”
option as Section 5
describes and verify that
“Airspaces” item is set
to “Yes”
Line
representing
route path
on moving
map screens
is missing
Route path
display on
moving map
screens set to
“Off”
Check “Map Setup”
option as Section 5
describes and verify that
“Route Path” item is set
to “Yes”