Filter
Top Products
Section 1
Introduction to the Apollo 360 Map Display
This section introduces you to the Apollo 360 and explains
how to use andswitchbetween the unit’s operating functions.
A description of information that shows on the display when
you use each function is included at the back of this section.
Section 2 builds on the introductory information presented
here as you switch on and begin using the Apollo 360.
Remember that the Apollo 360 Map is not
a primary
navigation instrument. It works in conjunction with a GPS or
Loran that can provide position, bearing, flight plan, and
other useful information. The Apollo 360 Map is a
supplemental navigation display. The quality of the position
information it displays is dependent on the navigation device
providing that information. Do not
attempt to conduct an
approach based on theinformationfrom the Apollo 360 Map.
Use a navigation device authorized for flying approaches to
navigate this phase of flight.
The
Operating
Functions
There are five main operating functions, each performing a
different and unique task while you navigate. Each function
also provides one or more screens of information on the
display. At least one of these functions is always in use when
the unit is on. The functions operate independently of one
another, so you can switch between them.
The five operating functions are:
Navigation (always active)
Menu
Goto nearest
New waypoint
Waypoint information
P/N 560-0119-00 1-1
Apollo 360 Map Display Introduction to the Apollo 360