Filter
Top Products
Screen
Controls
This optioncontrolsoperationofthedisplaybacklight,and
allows you to adjust display contrast. Turn the SMALL
knob to select backlight Off, Lo, MLo, MHi, or Hi
intensity levels. This option also allows selection of either
1-Leg or 3-Leg Route Display screens.
Note
You can also control the display backlight using the
backlight key atthe lower right ofthe front panel. Press
this key repeatedly to switch the backlight intensity
through the levels described above.
Turn the LARGE knob to select “CONTRAST.” Adjust
display contrast by turning the SMALL knob.
Adjust the contrast to suit your preference and viewing angle.
As you make adjustments, the horizontal bar at the bottom of
the display shows the current contrast level. “-” indicates
lower contrast, while“+”indicateshighercontrast.Acontrast
setting near the middle ofthe bar issatisfactory in most cases.
The contrast setting you select is stored in memory and
remains in effect until you change it.
Turn the large knob to highlight the route display selection
and the small knob to select between 1-Leg and 3-Leg
Route Displayscreens.The1-Legdisplayuseslargeletters
for easier viewing. The 3-Leg display provides more
information on a single screen.
Map
Setups
This option controls what and how information shows on
the moving map screens. Select whether or not the Apollo
360 should show a route path or airspaces in the vicinity.
4-4 P/N 560-0119-00
Menu Function Options Apollo 360 Map Display