Filter
Top Products
Section 2
Getting Started
This section explains how to get started using the
Apollo360. Information in this section explains how to
quickly start the Apollo 360 and check for proper
operation.
Power up
Check for host input
Check for route input
Begin navigating
Power Up To switch the unit on, turn the power knob clockwise (the
knob is above and to the left of the display). The startup
screens show on the display for several seconds.
The first screen identifies the procuct. The second screen
provides a reminder that this product is approved for VFR
use only. It also identifies the installed database and gives
the expiration date. Press Enter to acknowledge the startup
information and proceed to the navigation displays.
P/N 560-0119-00 2-1
Apollo 360 Map Display Getting Started