Filter
Top Products
Camera interfaces
Hardware Installation Guide V2.0.0
42
Camera I/O connector pin assignment (12 pin):
DOLPHIN, OSCAR, MARLIN, PIKE, STINGRAY
The 12-pin camera I/O connector (DOLPHIN, OSCAR, MARLIN, PIKE,
STINGRAY) is also designed for industrial use and, in addition to providing
access to the inputs and outputs on the camera, it also provides a serial
interface for e.g. the firmware update.
The connector is available in straight and angled version under the following
numbers:
Order text Order number
PC-12P 12-Pin
HR10A-10P-12S
cable connector female
K7600040
PC-12PW 12-Pin
HR10A-10LT-12S
angled cable connector female
K7600044
Table 10: Order numbers: I/O connector
Note
L
AVT supplies suitable I/O cables of different lengths (up to
10 m) as shown below.
Order text Length Order number
Trigger cable
12-pin HIROSE female to BNC
2.0 m E1000648
Trigger cable
12-pin HIROSE female to BNC
5.0 m E1000772
Trigger cable
12-pin HIROSE female to open end
2.0 m E1000728
Trigger cable
12-pin HIROSE female to open end
10.0 m E1000736
I/O cable
12-pin HIROSE female to open end
2.0 m K1200191
I/O cable
12-pin HIROSE female to open end
3.0 m K1200192
Table 11: Order numbers: trigger and I/O cables