Filter
Top Products
Camera interfaces
Hardware Installation Guide V2.0.0
37
IEEE 1394b port pin assignment
(PIKE, STINGRAY)
The IEEE 1394b connector is designed for industrial use and has the following
pin assignment as per specification:
Figure 12: IEEE 1394b connector
Note
L
• Both IEEE 1394b connectors with screw lock mecha-
nism provide access to the IEEE 1394 bus and thus
makes it possible to control the camera and output
frames. Connect the camera by using either of the con-
nectors. The other connector can be used to daisy chain
a second camera.
• Cables with latching connectors on one or both sides
can be used and are available with lengths of 5 m or
7.5 m. Ask your local dealer for more details.
12
3
4
56789
Pin Signal
1TPB-
2TPB+
3TPA-
4TPA+
5 TPA (Reference ground)
6VG (GND)
7N.C.
8 VP (Power, VCC)
9 TPB (Reference ground)