Filter
Top Products
AVT cameras: installing hardware
Hardware Installation Guide V2.0.0
30
Overview hardware installation
• Install IEEE 1394 adapter (if PC or laptop does not have an IEEE 1394
port)
• Install software (FirePackage/Fire4Linux incl. viewer) and start the
viewer: see FirePackage/Fire4Linux User Guide
• Connect camera to PC or laptop and ensure that the camera is powered
Installing IEEE 1394 adapter
1. PC: Install the IEEE 1394 adapter according to the instructions you got
from your adapter manufacturer.
Laptop: Insert the IEEE 1394 PC Card into your laptop. Connect external
power supply to the adapter to power the camera or power the camera
via Hirose connector.
2. Windows 2000/XP/VISTA will detect the hardware automatically and
installs a Windows 1394 driver.
Windows NT4 requires that you install the driver manually via a service
install tool.
FireWire cable -1x Interlock IEEE 1394a; (1x Interlock) 10 m,
for Marlin / Oscar / Guppy
K1200159
Cable 0.5 m 9 pin - 6 pin,
industrial
IEEE 1394b/a; 9 pin (screw lock)/6 pin (latch), 0.5 m K1200198
Cable 4.5 m 9 pin - 6 pin,
industrial
IEEE 1394b/a; 9 pin (screw lock)/6 pin (latch), 4.5 m K1200171
Cable 0.5 m 9-pin - 9-pin,
industrial
IEEE 1394b; 2x screw lock, 0.5 m, black, 2x ferrite K1200201
Cable 5.0 m 9-pin - 9-pin,
industrial
IEEE 1394b; 2x screw lock, 5.0 m, black, 2x ferrite K1200133
Cable 7.5 m 9-pin - 9 pin,
industrial
IEEE 1394b; 2x screw lock, 7.5 m, black, 2x ferrite K1200134
Note
L
Read the software manuals (FirePackage/Fire4Linux User
Guide) to get information on licensing, acquiring your first
image with viewer and troubleshooting.
FireWire cable Description Ordering number
Table 5: 1394 locking cables