AVT camera cleaning instructions
Hardware Installation Guide V2.0.0
26
6. If despite warnings you want to clean your camera with compressed air:
7. Please gently blow the impurities off with dust-filtered, oil-free air
(< 1 bar). Using ionized air will help to remove any dirt stuck to the
optical component because of static electricity.
Caution
a
• Use an air blower/compressed air only if you are famil-
iar with cleaning a camera with this instrument.
• Compressed air may push dust into cameras and
lenses. Therefore keep the pressure at a moderate
strength only:
– The pressure at the tube should be less than 1 bar
– operating distance: 5-30 cm
Note
L
If dust spots remain after cleaning twice, please contact your
AVT dealer.