Filter
Top Products
Safety instructions
Hardware Installation Guide V2.0.0
19
Caution
a
Board level cameras: General Warnings
• Be sure that all power to your board level cameras is
switched off, before mounting the sensor board or mak-
ing connections to the camera.
• Do not connect or disconnect any cables during an elec-
trical storm.
• Do not use your board level cameras during an electrical
storm.
• To help avoid possible damage to the sensor board or
main board, wait 5 seconds after power is switched off,
before connecting or disconnecting any cable to the
board level cameras.
• Ensure that nothing rests on the cables of your board
level cameras.
• Keep your board level cameras away from radiators and
heat sources.
• Do not spill food or liquids on your board level cameras.
Caution
a
Board level cameras: Loading
• Avoid any mechanical forces to the board level cameras,
the boards and its components, especially torsional,
tensile and compressive forces. Any of these forces may
result in damage of the board level cameras, the boards
and its components.
• To avoid damages of the boards, provide cables with an
external pull relief so that no force is applied to the
connectors itself.
Caution
a
Board level cameras: Dirty environments
• Always use clean boards.
• To protect the boards from dirt like dust, liquids or
swarf always use the board level cameras only in clean
room environment or use a protective housing.