Filter
Top Products
SECTION 13 - PARAMETERS PROGRAMMING 13-22
PHASE RESEARCH
USER GUIDE
5.b. Press to move cursor to the right of the percentage.
5.c. Press or to select the desired percentage at which the Display
will change color.
5.d. Press to move the cursor to [%].
5.e. Press or to select the event to be monitored.
6. Press to move the cursor to [FLASH AVG].
7. Press or to select the averaging period (HOURLY; DAYPRTS;
SHIFTS; DAILY; WEEKLY; MONTHLY; ALT). The averaging period applies
to all Remote Displays. If you select a blank value, no averages will be flashed
between events.
NOTE: Depending on the model of the Remote (one-color, two-color, or percentage),
the data will be shown either in minutes:seconds, seconds only, or percentage.
Time data will be displayed only during the hours the store is open. When
closed, only a colon (two vertical dots, i.e., :) is shown on a minutes:seconds
Display; a seconds and percentage Display is blank.