Adaptec 2+2/386 Home Safety Product User Manual


 
PHASE RESEARCH
USER GUIDE
SECTION 2 - OPERATION 2-4
2-2.1 Multiple Vehicles
The Timer is capable of keeping track of up to 16 vehicles moving simultaneously through
each drive-thru lane. The Timer can track the progress of each vehicle independently, accu-
rately noting when each car moves onto or off a vehicle detection zone.
2-3 Electrical Power
The Timer’s electrical power, supplied by an external transformer, is always left on. The trans-
former is connected by a power cord to a 110 VAC power outlet.
WHEN POWER RETURNS AFTER ANY INTERRUPTION,
THE FAST TRACK 2+2/386 2000 SERIES TIMER TESTS ITSELF, ITS THERMAL PRINTER,
AND ANY ATTACHED REMOTE DISPLAYS.
When power is applied, the Remote Display(s) powers on and shows its numerical address. The
Remote Display(s) then shows digits counting down from 9 to 0 and beeps during the process,
allowing you to verify that the Display(s) is working properly. Each Remote Display then
resumes displaying the elapsed times and average times for its assigned event.
The printer prints reports for the power reset and is then available again for reporting. The
Timer next displays the Activity screen and begins acquiring data, producing scheduled reports
automatically at the appointed times.