Filter
Top Products
SECTION 13 - PARAMETERS PROGRAMMING 13-10
PHASE RESEARCH
USER GUIDE
SECTION 13 - PARAMETERS
13-1.4 Set Dayparts
The Set Dayparts screen lets you break each day into a number of smaller units called day-
parts, which are used to group data for viewing and reporting.
From STORE PARAMETERS Screen (see “PARAMETERS PROGRAMMING” on
page 13-1):
1. Press to select [DAYPARTS].
2. Press . You are now in the Set Dayparts screen.
NOTE: The cursor is now on DAY. To change the day of the week, complete the
following two steps.
3. Press to move the cursor immediately to the right of DAY:.
4. Press or to change the day.
5. Press to move to the desired daypart.
6. Press to move to the [=] or [-] fields to change the START or STOP
times.
11:00 AM MON FEB 23
SET DAYPARTS
DAY: SUN
START STOP
COPY TO ALL <ENTER>
1= 6:00AM-10:30AM
2=10:30AM- 1:00PM
3= 1:00PM- 4:30PM
4= 4:30PM- 8:00PM
5= 8:00PM-12:00AM
6
7
8