Filter
Top Products
Out of the Box 3
Out of the Box
2
Charge the remote
The next step is to install the Xsight™ Touch’s rechargeable battery, plug in its cradle, and let it charge for 3 to 4
hours.
Remove the battery door from the
back of the Xsight™ Touch. Press up
on the latch to release the door.
®
Install the rechargeable battery
in the Xsight™ Touch’s battery
compartment and replace the battery
door.
Assemble the charging cradle by
sliding the cradle rest into the cradle
base as shown here.
Plug the AC adapter into the cradle
as shown. Plug the other end of the
adapter into a wall outlet or surge
protector.
You can use the remote right away
(battery’s charged), but we recommend
full charge before rst use—3–4 hours.
Place the remote in the cradle and
leave it to charge for 3–4 hours.
Need help setting up this
remote?
Please call our help line toll-free at
1-800-276-0509.