Filter
Top Products
22 Activities
Once your remote is ready to test, the screen to the right appears.
Carefully disconnect the remote from your PC.
The remote screens guide you through testing this activity.
Read about the test
The rst screen gives you some information about the test. Use the slider to go
to the next screen.
IMPORTANT: Make sure all your devices are on before you start.
Test individual power commands
The second screen lets you test the power command you set for each
device. Press the on-screen remote button for each device to see if it turns
that device off. (If it does, make sure you turn it back on!) Only the rst
three devices are shown on this page. Use the slider to test the rest of your
devices.
IMPORTANT: If you notice one of your devices does not respond to the power
command, make a note—you will need to change the power command you give to
that device.
Under your last device, there’s is an on-screen OK button. Press OK to
continue with the test.
3
Test the Good Night activity with your devices.
12:35
DirecTV Satellite Box
Onkyo DVD
Sony TV
12:35
OK
Harmon/Kardon
Audio
12:35
Press the power
button on the next
page to turn off or
on your devices in
this activity.